English _47
● CAMERA SETUP
USING THE CAMERA MENU
Follow the steps below if you run the Web Viewer for setting the menus.
1. Launch the Web Viewer.
2. Click [Camera Menu (
)] in the left
corner of the Live screen.
The camera setup menu appears.
3. Use the Up/Down (▲/▼) buttons to move
to a desired item.
4. To change the value of a selected item,
use the Left/Right (◄/►) buttons.
To break down to a sub-menu structure,
click [Enter (
)] on the selected item.
: This arrow appears next to a menu that contains sub items.
: Exits the Menu Setup.
Select the <SAVE> or <QUIT> before exiting the menu setup to save the whole menu
setup or not.
J
If <IV analysis function> is enabled, camera’s OSD menu operation can be set as an event.
CONFIGURING THE MAIN MENU
PROFILE
You can select one of the specified configurations for a specific environment.
Ö
Ö
▲/▼
Ö
1. Go to <PROFILE>.
camera setup
To Next Page
Loading...
