English _57
● SETUP SCREEN
Video setup
1. From the Setup menu, select the
<Audio & Video
( )
> tab.
2. Click <Video setup>.
3. Select a <Video source> mode.
Flip mode : Turn upside down the
image that is captured by the
camera.
Mirror mode : Flip horizontal the
image that is captured by the
camera.
4. When done, click [Apply (
)].
To set the privacy zone
You can specify a certain area of the camera video to be protected for your privacy.
1. Set it to <Enable>.
2.
Click the image and select 4 corners to
set your desired zone.
When the pop-up window to add a new
privacy zone appears, type a name for
the new zone and click the
[Apply
( )] button.
Do not drag when specifying the privacy zone.
3. Select the <Pattern> to display in the
privacy zone.
If you select the [Solid] among <Pattern>
items, the corresponding zone is displayed in
solid gray color.
If you select the [P4 ~ P1], the corresponding zone is digitized.
4. To delete the selected area, click the [
Delete
( )
] button.
5. When done, click [Apply (
)].
You can set up to 12 privacy zones in maximum.
To Next Page
Loading...
