Samsung SNV-3120 - Time Schedule

English _69
● SETUP SCREEN
J
 Even if the <Video analysis> is enabled, the video analysis function does not work when
entering through the operating menu in the camera.
 If camera is capturing a close object, the video analysis capability may degrade. In the following
cases, the video analysis function may not produce a proper result on the default event and
motion detections.
- The object color or brightness is similar to the background
- Multiple movements continue occurring at random due to a scene change or other reasons.
- A fixed object continues moving in the same position.
- An object hides other objects behind.
- Two or more objects overlap or one object divides in multiple portions
- Too fast object (for a proper detection, one object should be found overlapping between
contiguous frames).
- Reflection / blur / shadow due to a strong light such as direct sunlight, illumination, or headlamp
- In severe snow, rain, wind or in dawn / dusk
- A moving object comes close to the camera
Time schedule
You can configure so that an event will occur at a scheduled time regardless of the actual
occurrence of the event.
1. From the Setup menu, select the
<Event (
)> tab.
2. Click <Time schedule>.
To set the timer event
1.
Set <Timer event setup> to <Enable>.
2. Specify the <Activation time>.

Always : Always activates in operated
mode at the set interval.

Only scheduled time :
Periodically
activates in operated mode at a
specified time and date.