4. Select <Area> tab.
You can specify an area on the screen
to include or exclude the area to/from
detection.
You can specify up to 4 areas.
• Detection area : Sets the entire
screen as excluded from detection,
and adds specified area as motion
detection area. To click and drag
on a video, and specify a desired
detection area.
• Non detection area : Sets the entire
screen as motion detection area,
and excludes specified area as not
to be detected. To click and drag on
a video, and specify a desired non-
detection area.
5. To delete an area, right click on the
screen to open popup context menu
and select Delete, and [OK] button.
6. When done, click [Apply (
)].
English _125
● SETUP SCREEN
To Next Page
Loading...
