English _53
● INSTALLATION & CONNECTION
1. Connect the MIC port of the camera with the microphone or LINE OUT port of the
amplifier that the microphone is connected to.
M
`
As a microphone is built in, you can use the built-in microphone instead of an external one.
(It is applicable only to the SND-L6013/SND-L6013R/SND-L6083R model.)
2. Check the specifications for audio input.
• Audio Codec
- Audio In : G.711 PCM (Bit Rate: 64kbps / Sampling Frequency: 8kHz), G.726
ADPCM (Bit Rate: 16Kbps, 24Kbps, 32Kbps, 40Kbps / Sampling Frequency: 8kHz)
• Audio in : Mono signal line input (Max.2.4 Vpp)
• Line out impedance : 600Ω
To Next Page
Loading...
