EasyManua.ls Logo

Samsung SP0802N - Table 6-17 Off-Line Data Collection Status Values

Samsung SP0802N
119 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DISK DRIVE OPERATION
SpinPoint P80
Product Manual Rev. 01
78
Table 6-17 Off-line data collection status values
Value Definition
00h or 80h Off-line data collection activity was never started.
01h Reserved
02h or 82h Off-line data collection activity was completed without error.
03h Reserved
04h or 84h Off-line data collection Activity was suspended by an interrupting command from host
05h or 85h Off-line data collection Activity was aborted by an interrupting command from host
06h or 86h Off-line data collection Activity was aborted by the device with a fatal error.
07h-3Fh Reserved
40h-7Fh Vendor specific
81h Reserved
83h Reserved
87h-BFh Reserved
C0h-FFh Vendor specific
The total time in seconds to complete off-line data collection activity word specifies how may seconds the
device requires to complete its sequence of off-line data collection activity. Valid values for this word are
from 0001h to FFFFh.
Off-line data collection capability.
The following describes the definition for the off-line data collection capability bits. If the value of all of
these bits is equal to zero, then this device implements no off-line data collection.
Bit 0 (EXECUTE OFF-LINE IMMEDIATE implemented bit) – If the value of this bit equals one, then
the SMART EXECUTE OFF-LINE IMMEDIATE command is implemented by this device. If the value
of this bit equals zero, then the SMART EXECUTE OFF-LINE IMMEDIATE command is not
implemented by this device.
Bit 1(vendor specific)
Bit 2 (abort/restart off-line by host bit) – If the value of this bit equals one, then the device shall abort all
off-line data collection activity initiated by an SMART EXECUTE OFF-LINE IMMEDIATE command
upon receipt of a new command. Off-line data collection activity must be restarted by a new SMART
EXECUTE OFF-LINE IMMEDIATE command from the host. If the value of this bit equals zero, the
device shall suspend off-line data collection activity after an interrupting command and resume off-line
data collection activity after some vendor-specified event.
Bits 3-7 (reserved).

Table of Contents

Other manuals for Samsung SP0802N

Related product manuals