How to exit full screen on Samsung SRD-470 DVR WebViewer?
If you press the ESC key in full-screen mode of the WebViewer on your Samsung DVR and the system doesn't switch to a normal split mode, press the ALT+TAB keys to select ‘ACTIVE MOVIE’ and then press the ESC key again. The system should then switch to a normal split mode.
What does the 'No HDD' icon mean on my Samsung SRD-470 DVR?
To address the “NO HDD” icon and error message displayed on your Samsung DVR, check the HDD connection. If the problem persists under normal conditions, contact the nearest service center for the HDD to be checked by service personnel.
Why is the time bar not displayed in search mode on my Samsung DVR?
The timeline on your Samsung DVR can switch between normal and extension mode. If the time bar is not displayed, you are likely in extension mode. Switch to normal mode or use the left or right button to navigate through the time bar.
General| Model | SRD-470 |
|---|---|
| Category | DVR |
| Recording Rate | 120 fps |
| Storage Capacity | Up to 2TB |
| Hard Drive Capacity | Up to 2TB |
| Compression Format | H.264 |
| Network Interface | Ethernet |
| Power Supply | 12V DC |
| Remote Viewing | Yes |
| Motion Detection | Yes |
| Operating Temperature | 0°C to 40°C |
| Recording Resolution | 720x480 |
| Hard Drive Support | 1 SATA HDD |
| Video Inputs | 4 x BNC |
| Audio Inputs/Outputs | 1 x RCA In, 1 x RCA Out |
Guidelines for optimal environmental setup and rack mounting.
Instructions and cautions for installing additional hard drives.
Displaying multiple live video images in different screen modes.
Configuring system properties like date, time, and language.
Configuring camera, storage, remote, POS, and monitor settings.
Setting up scheduled, event, and continuous recording options.
Setting up sensor, motion, and video loss detection parameters.
Configuring network settings for remote monitoring and mail forwarding.
Playing back recorded data stored on the HDD or backup.
Managing user permissions and access rights.
To Next Page
