30_ live
live
AUDIO ON/OFF
You can turn the sound on/off corresponding to the channel in Live mode.
AUDIO ON/OFF in Single mode
Click the audio icon ( ) on the screen, or press the [AUDIO] button on the front panel or the remote control
to turn it on/off.
Only the channel where <AUDIO> is set to <ON> in “Device > Camera” displays the audio icon ( ) in Live
mode that you can use to turn the sound on/off.
FREEZE
This is available only in Live mode, this pauses playing the Live image temporarily.
Press the [FREEZE] button on the front panel or the remote control, or click <
Freeze
> in the launcher
menu.
The playback of the image is stopped temporarily.
Press the [FREEZE] button again, or click <
Freeze
>.
This will release the freeze.
EVENT MONITORING
This will display the channel in sync with a specific event (Sensor/Motion/Video Loss) if it occurs.
In “Monitor > Event Display”, set the event monitoring to ON/OFF and specify the event display time. (Page 48)
If multiple events occur simultaneously, the screen will switch to a split mode.
- 2~4 events : 4-split mode
If the second event occurs within the set time of <Event Display>, the first event will last until the second
one is terminated. (Page 48)
Ex : If you set <Event Display> to 5 seconds, and only one event occurs in CH 1.
M
`
1.
2.
~
~
`
Event occurrence 5 seconds
Stop alarm
To Next Page
Loading...
