To Next PageTo Next PageWhat to do if a Samsung SRD-470D does not recognize all installed HDDs?
If your Samsung DVR isn't recognizing all the installed HDDs, try again after a moment. If the problem persists, it might be due to a mechanical error with the HDD. Try using a different HDD to see if that resolves the issue.
Why doesn't the Channel button work on the Live screen of my Samsung DVR?
The Channel button on your Samsung DVR's Live screen won't work if the current screen is in event monitoring mode. To exit this mode, press the [ALARM] button, then select a channel.
How to release the alarm on a Samsung SRD-470D?
To release the alarm on your Samsung DVR, press the [MENU] button on the front panel and follow these steps: 1) To release the event monitoring mode: Set the duration of the event monitoring to Off in the Monitoring Mode settings. 2) To release the alarm sound: Deactivate the alarm sound in Event Record Mode - Alarm (Motion Detection/Video Loss). 3) To release the event: Set the mode to Off in Event Record Mode - Alarm (Motion Detection/ Video Loss).
How to fix Samsung SRD-470D DVR when the REC button doesn't work?
If the REC indicator doesn't flash and the player doesn't start recording when you press the [REC] button on your Samsung DVR, check if there's enough free space on the HDD. Also, verify that the record mode is set to ON in the record mode settings.
What to do if the 'NO HDD' icon appears on my Samsung SRD-470D?
If you see the “NO HDD” icon and an error message on your Samsung DVR, first check the physical connection of the HDD. If the problem continues under normal conditions, it's recommended to contact a service center to have the HDD inspected by qualified personnel.
What to do if the Samsung SRD-470D DVR does not turn on?
If your Samsung DVR isn't turning on, start by checking if the power supply is properly connected. Next, verify the system's input voltage from the power source. If it still fails to power on after these checks, the power supplier might be faulty and need replacement.
How to switch to Live mode on Samsung SRD-470D during playback?
General| Product color | Black |
|---|---|
| Channels quantity | 4 channels |
| Maximum recording time | 6 h |
| Video compression formats | H.264 |
| Operating system installed | Embedded LINUX |
| Analog signal format system | NTSC, PAL |
| Display resolution | 704 x 576 pixels |
| Video in | 4 |
| eSATA ports quantity | 0 |
| USB 2.0 ports quantity | 2 |
| Ethernet interface type | Fast Ethernet |
| Supported network protocols | TCP/IP, DHCP, PPPoE, SMTP, NTP, HTTP, DDNS, RTP, RTSP |
| HDD capacity | 500 GB |
| HDD interface | Serial ATA |
| Optical drive type | DVD-RW |
| Optical drive included | Yes |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 20 - 85 % |
| Power requirements | 100 - 240V AC ±10%, 50/60Hz |
| Power consumption (typical) | 35 W |
Weight and Dimensions| Weight | 4000 g |
|---|---|
| Dimensions (WxDxH) | 215 x 352 x 88 mm |
