English _5
Network Connection
Port forwarding
1. Check the “Default Gateway” from the network properties of the
PC connected through the router.
2. From <Network> - <Connection Mode>, select <Connection>.
A window of connection mode setup appears.
3. Use direction buttons (
◄ ►
) to move to a desired item, and
set the value.
4. Enter the gateway address found in step 1 into the browser’s
address field to display the router settings.
5. Select the “Advanced” tab in the “Virtual Server” menu, enter the
IP address and port and click the <Apply> button.
M
Above instructions are based on D-LINK DI-624 router. Port forwarding
setup may differ from the router’s manufacturer.
1
NO
COM COM COM COM
NC NO NO NO
234
ALARM OUT
G
+-
TX
+-
RX
ALARM
RESET
CONSOLE HDMIeSATA VGA OUT USB
SERIAL
16151413121110912345678
123456 78 9
10 11 12 13 14 15 16
ALARM IN
G G G G
NETWORK
AUDIO IN CH5 ~ CH16
CH1
CH3
CH2
CH4
VIDEO IN
AUDIO IN
LOOP OUTAUDIO OUT
Broadband Modem
Remote PC
Internet
Broadband
Router or HUB
Local PC
Connection Mode
Interface
Port Alarm
x
IP Type Static
x
Transfer Bandwidth 2Mbps
OK Cancel
x
IP Address 192.168.1.200
x
Gateway 192.168.1.1
x
Subnet Mask 255.255.255.0
x
DNS
Manual 168.126.63.1
To Next Page
Loading...
