Samsung SRD-894 - Connecting the Network

26_ connecting with other device
connecting with other device
Connecting the RS-485 Device
Connect the [TX/RX +, –] device through the back port.
M
 You can connect and control the PTZ camera which supports the RS-485 communication.
 Check if the RS-485 device is compatible with the product first.
 Pay attention not to change the polarity (+/-) of the RS-485 device when connecting it.
 Depending on camera’s type, connection polarity can be different.
For further information, refer to the respective PTZ Camera’s documentation.
CONNECTING THE NETWORK
Connecting to Network through Ethernet (10/100/1000BaseT)
USB
AUDIO IN CH5 ~ CH
8
5
6
7
8
2
NETWORK
Windows
Network Viewer
RJ-45 Ethernet Cable
(Direct Cable)
Hub/Switcher
Hub/Switcher
Back Bone
USB
AUDIO IN CH5 ~ CH
8
5
6
7
8
2
PTZ camera
system keyboard