28
English
Basic Features
✎
Settings can be adjusted and stored for each external
device connected to the TV.
✎
Lowering picture brightness reduces power
consumption.
¦ Changing the Picture Size
O
MENU
m
→ Picture → Screen Adjustment →
ENTER
E
Screen Adjustment
Screen Adjustment provides various
picture size and aspect ratio options. Select
an option using the up and down arrow
keys, and the press ENTER
E
. Use the
arrow keys to select an option in the sub-
menu, and then press ENTER
E
.
■ Picture Size: Your cable box/satellite
receiver may have its own set of screen
sizes as well. However, we highly recommend you use
16:9 mode most of the time.
✎
In HDMI1/DVI mode(when a PC is connected), you can
only make changes to 16:9 and 4:3.
16:9: Sets the picture to 16:9 wide mode.
Zoom1: Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
✎
Available with HD 1080i / 720p signals in 16:9
mode.
4:3: Sets the picture to basic (4:3) mode.
✎
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention (screen
burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are inputted.
Smart View 1: Reduces the 16:9 picture by 50%.
Smart View 2: Reduces the 16:9 picture by 25%.
✎
Smart View 1 is enabled only in HDMI mode.
✎
Smart View 2 is enabled only in HDMI or DTV
mode.
✎
The picture size can vary depending on the input
resolution when content is played using Videos
under Smart Hub.
✎
NOTE
x
After selecting Zoom1, Zoom2 or Wide Fit:
1. Press the
d
button to select Position.
2. Press the ENTER
E
button.
3. Press the
u
or
d
button to move the picture up
or down.
4. Press the ENTER
E
button.
5. Select Close by pressing the
d
and
r
buttons
sequentially. To reset the picture position, press
Reset.
x
After selecting Screen Fit in HDMI (1080i/1080p) or
Component (1080i/1080p) mode, you may need to
center the picture:
1. Press the
d
button to select Position.
2. Press the ENTER
E
button.
3. Press the
u
,
d
,
l
or
r
button to move the
picture.
4. Press the ENTER
E
button.
5. Select Close by pressing the
d
and
r
buttons
sequentially. To reset the picture position, press
Reset.
x
HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
x
Settings can be adjusted and stored for each
external device you have connected to an input on
the TV.
Input Source Picture Size
ATV, AV, Component
(480i, 480p)
16:9, Zoom1, Zoom2, 4:3
HDMI (720p, 1080i,
1080p)
Smart View 1
DTV(1080i), HDMI
(720p, 1080i, 1080p)
Smart View 2
DTV(1080i),
Component (1080i,
1080p), HDMI (720p,
1080i, 1080p)
16:9, 4:3, Wide Fit, Screen Fit
HDMI1/DVI(when a
PC is connected)
16:9, 4:3
¦ Changing the Picture Options
Advanced Settings
O
MENU
m
→ Picture → Advanced Settings →
ENTER
E
✎
Advanced Settings are available in Standard / Movie
mode.
Compared to previous models, new Samsung TVs have a
more precise picture.
✎
In HDMI1/DVI mode(when a PC is connected), you can
only make changes to Gamma and White Balance.
P.SIZE
To Next Page
Loading...
