29
English
Basic Features
■ Black Tone (Off / Dark / Darker / Darkest): Select the
black level to adjust the screen depth.
■ Dynamic Contrast (Off / Low / Medium / High): Adjust
the screen contrast.
■ Shadow Detail (-2 ~ +2): Increase the brightness of
dark images.
■ Gamma: Adjust the primary color intensity.
■ Expert Pattern (Off / Pattern1 / Pattern2) : By
running the Expert Pattern function, the picture can be
calibrated. If the OSD menu disappears or a menu other
than the Picture menu is opened, the calibration is saved
and the Expert Pattern window disappears.
Off: Turns the Expert Pattern function off.
Pattern1: This is a test screen designed to demonstrate
the affects of display settings on shades.
Pattern2: This is a test screen designed to demonstrate
the affects of display settings on colors.
✎
After selecting Pattern1 or Pattern2 you can
adjust any of the advanced settings to the desired
effect.
✎
While the Expert Pattern is running, sound is not
output.
✎
Only enabled in DTV, Component and HDMI
modes.
■ RGB Only Mode (Off / Red / Green / Blue): Displays
the Red, Green and Blue color for making fine
adjustments to the hue and saturation.
■ Color Space (Auto / Native / Custom): Adjust the
range of colors available to create the image.
✎
To adjust Color, Red, Green, Blue or Reset set
Color Space to Custom.
■ White Balance: Adjust the color temperature for a more
natural picture.
R-Offset / G-Offset / B-Offset: Adjust each color’s (red,
green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each color’s (red,
green, blue) brightness.
Reset: Resets the White Balance to it’s default settings.
■ 10p White Balance (Off / On): Controls the white
balance in 10 point interval by adjusting the red, green,
and blue brightness.
✎
Available when the Picture Mode is set to Movie
and when the external input is set to all input.
✎
Some external devices may not support this
function.
Interval: Select interval to adjust.
Red: Adjust the red level.
Green: Adjust the green level.
Blue: Adjust the blue level.
Reset: Resets the 10p White Balance to its default
settings.
■ Flesh Tone: Emphasize pink “Flesh Tone.”
■ Edge Enhancement (Off / On): Emphasize object
boundaries.
■ Motion Lighting (Off / On): Reduce power consumption
by brightness control.
✎
When changing a setting value of Contrast,
Motion Lightning will be set to Off.
✎
3D is not supported.
Picture Options
O
MENU
m
→ Picture → Picture Options →
ENTER
E
✎
In HDMI1/DVI mode(when a PC is connected), you can
only make changes to the Color Tone.
■ Color Tone (Cool / Standard / Warm1 / Warm2)
✎
Warm1 or Warm2 will be deactivated when the
picture mode is Dynamic.
✎
Settings can be adjusted and stored for each
external device connected to an input on the TV.
■ Digital Noise Filter (Off / Low / Medium / High / Auto
/ Auto Visualization): If the broadcast signal received
by your TV is weak, you can activate the Digital Noise
Filter feature to reduce any static and ghosting that
may appear on the screen.
✎
When the signal is weak, try all the Digital
Picture Options
Color Tone Standard
Digital Noise Filter Auto
MPEG Noise Filter Auto
HDMI Black Level Normal
Auto Motion Plus Standard
• The displayed image may differ depending on the model.
Film Mode Off
Advanced Settings
Black Tone Off
Dynamic Contrast Medium
Shadow Detail -2
Gamma 0
Color Space Native
RGB Only Mode Off
• The displayed image may differ depending on the model.
Expert Pattern Off
To Next Page
Loading...
