Power indicator
Shows PowerSaver mode by blinking green
Note
See PowerSaver
described in the manual for further information regarding power
saving functions. For energy conservation, turn your LCD Display OFF when it
is not needed or when leaving it unattended for long periods.
POWER button
Use this button for turning the LCD Display on and off.
SOURCE button
Switches from PC mode to Video mode. Selects the input source that an external
device is connected to.
[PC] → [
DVI] → [AV] → [Component] → [HDMI1] → [HDMI2] → [Dis-
playPort] → [MagicInfo] → [TV]
Note
• A TV tuner box (sold separately) must be connected to use the TV.
• MagicInfo
can only be enabled when a network box is connected.
Function knob
The function
knob has a remote-control sensor, a light sensor and function keys. If mounting the display
onto a wall, you can move the function knob to the side of the display.
Default location of the function knob on the display upon purchase
Attaching the knob to the side
Introduction
To Next Page
Loading...
