Note
Select HDMI2 or HDMI1
as an input source when connected to the PC via an
HDMI cable.
To obtain normal picture and audio from the PC, HDMI2 or HDMI1 must be
selected before PC is selected in Edit Name.
To enable audio when DVI Device is selected, be sure to establish the connection
using step (
).
Connect the Audio cable for your LCD Display to the Audio port on the back of
the LCD Display.
Connect the power cord for your LCD Display to the Power port on the back of
the LCD Display. Turn on the power switch.
Note
Contact a local SAMSUNG Electronics Service Center to buy optional items.
Connecting to Other devices
Note
• AV input
devices such as DVD players, VCRs or camcorders as well as your computer can be
connected to the LCD Display. For detailed information on connecting AV input devices, refer to
the contents under Adjusting Your LCD Display.
• The LCD Display 's configuration at the back may vary slightly depending on the LCD Display
model.
Connecting an External Monitor
Connections
To Next Page
Loading...
