61
Reconnect to a Bluetooth Device
1. From a Home screen, touch ➔ Settings ➔
Connections tab ➔ Bluetooth.
2. Touch the OFF/ON button to turn Bluetooth ON .
3. Make sure that the target device is discoverable.
4. Touch the target device's name in the Bluetooth
devices section.
5. If prompted to enter a passcode, try 0000 or 1234, or
consult the target device's documentation.
Disconnect or Unpair from a
Bluetooth Device
Disconnect from a Bluetooth Device
You can disconnect your device from a Bluetooth device,
such as a headset. Disconnecting does not unpair the
Bluetooth device—the next time you connect, your device
and the target device will recognize each other and exchange
information without having to enter a passcode or PIN.
1. From a Home screen, touch ➔ Settings ➔
Connections tab ➔ Bluetooth.
2. Touch the OFF/ON button to turn Bluetooth ON .
3. Touch the connected device, and then touch OK to
disconnect.
Unpair from a Bluetooth Device
You can make your device forget its pairing connection with
another Bluetooth device. To connect to the other device
again, you may need to enter or confirm a passcode again.
1. From a Home screen, touch ➔ Settings ➔
Connections tab ➔ Bluetooth.
2. Touch the OFF/ON button to turn Bluetooth ON .
3. Under Paired devices, touch next to the device, and
then tap Unpair.
Bluetooth Settings
When Bluetooth is on, additional settings are available.
1. From a Home screen, touch ➔ Settings ➔
Connections tab ➔ Bluetooth.
2. Touch the OFF/ON button to turn Bluetooth ON .
3. Touch your device's name to enable or disable visibility
to other Bluetooth devices. When your device is visible,
other devices can find your device during a scan. Your
device remains visible for the period of time set in the
Visibility timeout setting.
To Next Page
Loading...
