Time
MENUm → System → Time → ENTERE
끄기
Time
Clock Set
DST
Sleep Timer
Power On Delay
O
O
0 sec
-
The displayed image may differ depending on the model.
Set the current time and sleep timer. Configure the power-on time delay setting to prevent power overload.
Clock Set
Set the current year, date and time.
―
Press the INFO button if you want to view the current time.
Select Clock Set. Select Date or Time, and then press E.
Use the number buttons to enter numbers or press the up and down arrow buttons. Use the left and right arrow buttons to
move from one entry field to the next. Press E when done.
―
You can set the Date and Time directly by pressing the number buttons on the remote control.
DST
Switches the DST (Daylight Saving Time) function on or off.
•
Off / On
•
Start Time: Set the start date of Daylight Saving Time.
•
End Time: Set the end date of Daylight Saving Time.
•
Time Offset: Select the correct time offset your timezone.
Sleep Timer
Automatically shuts off the product after a preset period of time.
(Off / 30 min / 60 min / 90 min / 120 min / 150 min / 180 min)
―
Use the up and down arrows to select a period of time, and then press E. To cancel Sleep Timer, select Off.
Power On Delay
When connecting multiple products, adjust the power-on time for each product to prevent power overload (within the range
0–50 seconds).
To Next Page
Loading...
