Samsung UE46D - Connection Using an IR Stereo Cable

Connection Using an IR Stereo Cable
(sold separately)
Turn off the device before connecting the External Sensor Kit. After it is connected,
turn on the device.
Controlling more than one display product using
your remote control
•
Connect the IR OUT port on the product to the IR / AMBIENT SENSOR IN
port on the other display product using the dedicated stereo cable.
•
A command sent from the remote control pointed at product
1
will be
received by both display products
1
and
2
.
―
The appearance may differ depending on the product.
1 2
IR OUT IR / AMBIENT
SENSOR IN
Controlling more than one display product using an
external sensor kit
•
A command sent from the remote control pointed at product
1
(to
which the external sensor kit is connected) will be received by both display
products
1
and
2
.
―
The appearance may differ depending on the product.
1 2
IR OUT IR / AMBIENT
SENSOR IN
IR / AMBIENT
SENSOR IN