Eco Solution
MENUm → System → Eco Solution → ENTERE
끄기
Eco Solution
Energy Saving
Screen Lamp Schedule
No Signal Power O
Auto Power O
O
O
O
O
-
The displayed image may differ depending on the model.
Energy Saving
Reduce the power consumption by adjusting the screen brightness.
•
Off / Low / Medium / High
Screen Lamp Schedule
Screen Lamp Schedule
Enable or disable the lamp schedule.
•
Off / On
Schedule 1, Schedule 2
Time
The panel brightness will change to the brightness set in Time at a specified time.
Lamp
Adjust the panel brightness. A value closer to 100 makes the panel brighter.
•
0 ~ 100
No Signal Power O
Save power by turning the device off when no signal is received from any source.
•
Off / 15 min / 30 min / 90 min
―
Disabled when an attached PC is in power saving mode.
―
The product will automatically power off at a specified time. The time can be changed as required.
Auto Power O
This feature automatically turns off the product to prevent overheating if the product is left idle for a specified period of time.
•
Off / 4 hours / 6 hours / 8 hours
To Next Page
Loading...
