How to save a map on Samsung Jet Bot?
To create a map, you need to register the device first and then start creating a map with the Smarthings App. When the Jet Bot starts cleaning from the Docking Station and completes cleaning one time in Auto Clean, a map is saved.
What to do if my Samsung Vacuum Cleaner Jet Bot has stopped during cleaning?
If your Samsung Vacuum Cleaner Jet Bot has stopped during cleaning, it could be due to a depleted battery, an obstacle, or foreign matter caught in the Driving Wheel. If the Status Indicator is red, place the Jet Bot on the Docking Station to charge. If it's immobilized, move it away from the obstacle. If there's fabric or string in a Driving Wheel, turn off the power and remove it. Also, check if the No-go Zones are set.
Why is the suction power weak on my Samsung Vacuum Cleaner?
The suction power on your Samsung Vacuum Cleaner might be weak because the Dustbin is full, or the brush is blocked by foreign matter. If there's too much dust, turn off the power and empty the Dustbin. If the brush is blocked, turn off the power and remove the foreign matter. Also, if noise suddenly increases, turn off the power switch and empty the Dustbin.
What to do if my Samsung Jet Bot fails to start on the SmartThings App?
If your Samsung Jet Bot fails to start on the SmartThings App, check if the Jet Bot is offline status on the SmartThings App. Connect the wireless router to Jet Bot again by referring to the ‘SmartThings App’ on the manual.
Why is the suction power weak on my Samsung Robotics Jet Bot?
If the suction power of your Samsung Robotics Jet Bot is weak, it might be due to too much dust in the Dustbin. Turn off the power switch and empty the Dustbin. Another possible cause is that the brush at the bottom of the Jet Bot is blocked by foreign matter; in this case, turn off the power switch and remove the foreign matter from the brush. Also, if the noise suddenly increases, turn off the power switch and empty the Dustbin.
What to do if my Samsung Robotics Jet Bot cannot find the Docking Station?
If your Samsung Robotics Jet Bot cannot find the Docking Station, check if there's a power failure or if the power plug is unplugged. Remove any obstacles around the Docking Station that may be preventing the Jet Bot from returning. Also, ensure there is no foreign matter on the charging terminals; if there is, clean it off.
Why doesn't the Intelligent Power Control function work on my Samsung Jet Bot?
When the Jet Bot cleans a carpet with short fiber and bright color, it may recognize the carpet as a floor and then the Intelligent Power Control function may not work.
What to do if my Samsung Jet Bot is connected to a smartphone without a problem, but the Jet Bot does not work with the smartphone?
Turn off the SmartThings App and then run it again, or disconnect the smartphone from the wireless router and then connect it again, or turn off the power supply of the Jet Bot, turn it on, wait for a minute or longer, and then run the SmartThings App again.
What to do if the 'Offline' message of the Samsung Jet Bot appears on the SmartThings App?
If the 'Offline' message of the Jet Bot appears on the SmartThings App though the Jet Bot's registration has completed without a problem, close the SmartThings App and then run it again. Check whether there is an internet connection problem of the wireless router. Especially, a firewall may interrupt standard operation.
What to do if my Samsung Jet Bot does not clean some places?
If your Samsung Jet Bot does not clean some places, check whether the Docking Station is installed in a narrow passage or near a room door and move it to another place. The Jet Bot cannot pass through the passage or the door if the Docking Station is installed in a narrow passage or near a room door. Also, check whether the places the Jet Bot does not clean are set as No-go Zones.
Explains symbols indicating potential dangers like death or serious injury.
Explains symbols providing additional important information for the user.
Provides general safety guidelines and warnings for operating the appliance and around children.
Lists safety precautions specific to the docking station, including electrical and handling safety.
Details safety precautions for the Jet Bot itself, covering object pickup and usage environments.
Covers electrical safety warnings, including risks of shock and fire from the power cord and adapter.
Outlines crucial checks and environmental considerations before operating the Jet Bot.
Provides critical safety instructions for operating the Jet Bot, including sensor care and avoiding hazards.
Details compliance with FCC rules and conditions for operation in the US and Canada.
States compliance with FCC radiation exposure limits and installation distance requirements.
Explains Industry Canada technical specifications and conditions for device operation.
Informs about the use of open source software and where to find license information.
Covers fundamental operations like powering the unit on/off and starting/stopping cleaning.
Instructions for turning the Jet Bot on and off using the power switch.
How to initiate the cleaning process in Auto Clean mode.
Steps to pause or stop the cleaning operation and return to the dock.
How to activate and cancel the Jet Bot's low-power sleep mode.
Details the available cleaning modes: Auto Clean, Room Clean, and Spot Clean.
Allows selection of specific cleaning modes, primarily for Room Clean.
Options to adjust the suction power to Max, Smart, or Normal settings.
Enables the Jet Bot to clean repeatedly until its battery is depleted.
Automatically increases suction power on carpets for enhanced cleaning.
Puts the Jet Bot in a low-power state after charging, disabling Wi-Fi.
Allows setting a schedule to prevent the Jet Bot from cleaning during specific times.
Enables setting a specific time for the Jet Bot to start cleaning automatically.
Allows defining areas on the map that the Jet Bot should avoid during cleaning.
Diagram illustrating the top and bottom parts of the Jet Bot with numbered labels.
Diagram showing the components of the Docking Station with numbered labels.
Step-by-step guide on how to remove, empty, and clean the dustbin and its filter.
Instructions on how to detach, clean, and reattach the main brush and its cover.
Guidance on cleaning various sensors including LiDAR, Obstacle, Cliff, and Dust sensors.
Procedure for cleaning the Jet Bot's driving wheels and removing any entangled matter.
Instructions for cleaning the spin brush, including detaching it if tangled with hair or threads.
Requirements and tips for configuring your wireless router for optimal app performance.
Steps to download and install the SmartThings app from various app stores.
Instructions on creating or logging into a SAMSUNG account for app use.
Guide on connecting your smartphone and registering the Jet Bot to the app.
Information on how the Jet Bot automatically checks for and installs software updates.
Details various functions controllable through the app, categorized into Monitoring, Control, and Setting.
Options for creating, editing, and resetting maps within the SmartThings App.
Important notes and cautions regarding the installation of the docking station and boundary markers.
Key points and troubleshooting tips for charging the Jet Bot and docking station.
Provides notes and cautions for operating the Jet Bot, including handling obstacles and dark areas.
Important notes and cautions regarding cleaning the Jet Bot, its parts, and handling foreign matter.
Guidelines and precautions for the proper use, handling, and care of the Jet Bot's battery.
General| Model | VR30T80 Series |
|---|---|
| Brand | Samsung |
| Power Source | Battery |
| Battery Type | Lithium-Ion |
| Charging Time | 240 min |
| Included Accessories | Charging Station, Power Adapter |
| Filtration System | 5-layer filtration system |
To Next Page