Disassembly and Reassembly _ 13
Part Figure Description
Top Cover Assembly
/ Door Switch
1. Remove the 4 screws from the cover top.
2. Separate the control panel assembly.
3. Separate the water valve, the pressure
switch.
Separate the housing to prevent stress
and damage to the wire-harness.
4. Separate the main wire harness, the
pressure switch hose clip, Grounding screw.
5. Remove 2 screws and separate the top cover
assembly by lifting and pushing ahead the
top part of the assembly.
6. Remove the 2 screws and separate
To Next Page
Loading...
