14 _ Disassembly and Reassembly
Part Figure Description
Sensor Pressure Switch
1. Disassemble the control panel assembly.
2. Separate the pressure switch housing.
3. Before separating the hose, release the clip.
When releasing the clip, take care that
you do not tear the hose.
Drain-Pump
1
3
5
2
4
6
2. Separate 2 clamps.
3. Remove
4. Separate 2 pins.
5. Remove the 13 screws in base.
6. Remove the 3 screws.
7. Screws are separated by ‘+’ shape hand
driver.
To Next Page
Loading...
