Installation
Important note to installer
Please read the following instructions carefully before installing your washer.
These instructions should be retained for future reference.
We recommend you hire a professional to install this washer.
Installation flow chart
Selecting a
location
Removing the
shipping bolts
(Front loading
washers only)
Connecting the
water and drain
Adjusting the
p,
leveling feet
Powering your
washing machine
Running atest cycle
RunRinse±SpinWi_h
Smallamount Of -_ Running
laundry (aboUt 85 Calibration Mode
towels) as a test Cycle
YES y
Check again before steps.
Finishing the
installation
Step-by-step installation
STEP 1 Selecting a location
NOTE
Before you install the washer, make sure the location:
• Has a hard, level surface without carpeting or flooring that may obstruct ventilation.
• Is away from direct sunlight.
• Has adequate ventilation.
• Is not exposed to freezing temperatures (temperatures under 32 °F or 0 oC).
• Is away from heat sources such as oil or gas.
• Has enough space so that the washer doesn't rest on its power cord.
20 English
WAS000] WA8700J "_VA52J 03133Y 01 EN indd 20 2015/4/20 15:33:44
To Next Page
Loading...
