EasyManua.ls Logo

Samsung WA52M8650A Series - Options

Samsung WA52M8650A Series
216 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
36 English
Washing a load of laundry
Washing a load of laundry
Cycle Description
Cycle 3
QUICK WASH For lightly soiled garments needed quickly.
ACTIVE WEAR
Use this cycle to wash exercise wear such as sports
jerseys, training pants, shirts/tops and other performance
clothing.
This cycle provides effective soil removal with gentle
action for special fabric care.
RINSE + SPIN
Use for loads that need rinsing only or to add rinse-added
fabric softener to a load.
SPIN Drains the water and spins at a high speed.
Options
Child Lock
To prevent children or infants from
accidently starting or setting the washer,
Child Lock locks all buttons except for the
POWER button.
Activating the Child Lock function
Press Temp. and Spin simultaneously for
approximately 3 seconds.
When you activate the Child Lock
function, the Child Lock indicator
blinks.
Using the Child Lock function
If the lid is opened when the Child Lock
function is on, “dC” is displayed and an
alarm sounds.
If the water level in the tub is above the
safe water level, “dC” is displayed on the
LED display and the washer starts to
drain water by force after 30 seconds.
If the water level in the tub is above
the safe water level and the Child Lock
function is turned on while the lid is
open, “CL” is displayed on the LED
display even if the washer is turned off
and the washer drains water by force.
When Child Lock is on and the washer is
off, if the water in the tub is above the
Reset water level and the lid is opened,
CL” is displayed on the LED display.
No alarm sounds, but the washer drains
the water. When the draining operation
nishes, the power automatically turns
off again.
If you activate the Child Lock function
while the washer is running, the START/
PAUSE button will not work.
After the compulsory drain, the “CL
blinks at 1 second intervals and the
washer enters the “CL” mode. (When
the washer is in the “CL” mode, only the
POWER button works.)
To cancel the “CL” mode, turn the power
off and then on again.
WA8600M_DC68-03774C-04_EN.indd 36 2019-02-14  5:36:30

Table of Contents

Related product manuals