Samsung WA52M8650A Series - Page 54

54 English
Troubleshooting
Troubleshooting
Problem Action
Vibrates excessively or
makes noise.
• Make sure the washing machine is on a level oor. If the oor is
not level, use the levelling feet to adjust the washing machine.
• Make sure the washing machine is not contacting any other object.
• Make sure the laundry load is balanced.
• Make sure the laundry is spread evenly in the washing machine.
Spread out the laundry evenly and start again.
• Make sure the space around the washing machine is free of
objects.
• Humming is produced normally during operation.
• Objects such as coins can cause noise. Remove these objects from
the washing machine after washing is complete.
Stops.
• Plug the power cord into a live electrical outlet.
• Check the fuse or reset the circuit breaker.
• Close the door, and then press or tap START/PAUSE to start the
washing machine. For your safety, the washing machine will not
spin unless the door is closed.
• Before the washing machine starts to ll, it will make a series of
clicking noises to check the door lock, and then does a quick drain.
• There may be a pause or soak period in the cycle. Wait briey and
the washing machine may start.
• Make sure the inlet hose lters at the taps are not clogged.
Periodically clean the lters. See page 50.
• This problem can occur temporarily due to low voltage in your
household electrical system. It will be resolved when the voltage
returns to normal.
WA8600M_DC68-03774C-04_EN.indd 54 2019-02-14  5:36:33