Removal and Reassembly _ 11
Part Figure Description
Disassembling
and Repairing the
Thermistor
1. Separate the Assy Thermistor and Guide Wire-T
while pulling the Assy Thermistor.
2. Separate the Assy Thermistor and Assy Wire
Harness while pressing the navel of the Housing.
3. Pull the Assy Thermistor from Tub Back.
When disassembling Assy Thermistor, leave the
rubber packing.
CAUTION
1. When assembling Assy Thermistor, push to the
end. If assembling like NG picture, water leakage
possibility is high.
2. When assembling and disassembling Assy
Thermistor , rubber Packing should be checked.
If the gap existed between rubber packing and
tub- back, water leakage possibility is high.
To Next Page
Loading...
