Removal and Reassembly _ 19
Part Figure Description
Disassembling the
Pump Motor Part
1. Remove the 2 screws holding the ASSY PUMP
DRAIN.
2. Separate the Clamp of the hose connected to the
PUMP and then pull the DRAIN-HOSE.
3. Separate the Clamp of the hose connected to the
PUMP and then pull the HOSE-AIR.
4. Separate the Clamp of the hose connected to the
PUMP and then pull the HOSE-DRAIN.
5. Separate the wire connected to the PUMP.
Removing the
Remaining Water
• If the washing machine works, drain the water
in the wash tub by selecting the Spin course.
If the washing machine does not work, remove
the laundry from the wash tub and scoop the
remaining water out of the tub using a cup.
To Next Page
Loading...
