EasyManua.ls Logo

Samsung WF501ANW Trouble Shooting Guide User Manual

Samsung WF501ANW Trouble Shooting Guide
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
WASHING MACHINE
Technical Information
Code No. : DC68-03011B_EN
• Duetopossibilityofpersonalinjuryorpropertydamage,alwayscontactanauthorized
technicianforservicingorrepairofthisunit.
• RefertoServiceManualfordetailedinstallation,operating,testing,troubleshooting,and
disassemblyinstructions.
AllsafetyinformationmustbefollowedasprovidedinServiceManual.
CAUTION
Toavoidriskofelectricalshock,personalinjuryordeath;disconnectpowertowasher
beforeservicing,unlesstestingrequirespower.
WARNING
(Technical information)WF501ANWX-03011B_EN.indd 1 2011-06-24 �� 6:20:23
Question and Answer IconNeed help?

Do you have a question about the Samsung WF501ANW Trouble Shooting Guide and is the answer not in the manual?

Samsung WF501ANW Trouble Shooting Guide Specifications

General IconGeneral
BrandSamsung
ModelWF501ANW Trouble Shooting Guide
CategoryWasher
LanguageEnglish

Summary

Technical Information and Safety

Safety Precautions and Warnings

Essential safety guidelines and warnings for servicing and operation.

General Error Function

Test Modes

Diagnostic Modes

Service Mode Tests

Fast Time Down Test Mode

Board Input Test Mode

Diagnostic Code Check Mode

Troubleshooting Overview

Trouble Diagnosis and Repair Cautions

General advice on diagnosing issues, static electricity, and PCB replacement.

Troubleshooting: Will Not Start, Leaking, No Tumble, Will Not Spin

Will Not Start Issues

Steps to diagnose why the washer unit fails to power on or start.

Leaking Problems

Checks for leaks in hose connections, standpipes, and internal hoses.

No Tumble Issues

Diagnoses why the drum does not rotate during cycles.

Will Not Spin Issues

Resolves the washer's inability to perform the spin cycle.

Troubleshooting: Water Fill, Suds, Lock Issues

No Water Fill Diagnosis

Identifies causes for the machine not filling with water.

Tub Full of Suds

Addresses excessive suds issues and mitigation strategies.

Troubleshooting: Key Operation, Draining, Temperature, Noise

PCB Component Checks

Related product manuals