How to prevent detergent from remaining in the drawer of my Samsung WW8 T Washer?
If detergent remains in the drawer of your Samsung Washer after a cycle, make sure the machine has sufficient water pressure. Ensure detergent is added to the center of the drawer and the rinse cap is properly inserted. If using granular detergent, position the detergent selector correctly. Consider removing the rinse cap and cleaning the drawer.
What to do if Samsung WW8 T Washer says door is open?
If your Samsung washer indicates that the door is open, even when it seems closed, make sure the door is properly closed and that no laundry is caught in the door.
Why Samsung WW8 T Washer won't start?
If your Samsung washer isn't starting, there could be several reasons. First, ensure the washing machine is properly plugged in and that the door is completely closed. Check that the water taps are open. You may need to tap and hold the start button to initiate the cycle. Also, verify that the Child Lock feature is not activated. Inspect the fuse or reset the circuit breaker, and confirm that power is being supplied correctly. A low voltage could be the issue, so double-check the power cord connection. Make sure no laundry is caught in the door. If your model has an AddWash door, ensure it's properly closed; press it firmly, then tap and hold to start. Finally, if you're adding laundry mid-cycle, close the AddWash door completely and tap and hold to resume.
Why Samsung WW8 T Washer does not start?
Your Samsung washer might not start for several reasons. Ensure it's plugged in, the door is properly closed, and the water taps are open. Tap and hold the start button. Check that Child Lock isn't activated. The washer clicks and does a quick drain before filling. Also, check the fuse or circuit breaker and ensure proper power supply. If the “DDC” message appears, close the AddWash door properly and tap and hold the start button again.
What to do if Samsung WW8 T does not drain and/or spin?
If your Samsung washer isn't draining or spinning, ensure the drain hose is straight and the debris filter isn't clogged. Close the door and tap and hold the start button. Make sure the drain hose isn't frozen or connected to a clogged drain system. Insufficient power can also cause this issue; the washer should resume normal operation once power is restored. Also, verify the drain hose is correctly positioned.
What to do if Samsung WW8 T leaks water?
If your Samsung washer is leaking water, ensure the door is properly closed and all hose connections are tight. Make sure the drain hose is correctly inserted and secured to the drain system, and avoid overloading the machine. Using high efficiency (HE) detergent can also help prevent oversudsing, which can cause leaks. Check the drain hose to ensure it is not placed on the floor or clogged.
What to do if Samsung WW8 T Washer door does not open?
If the door of your Samsung washer won't open, tap and hold the start button to stop the machine. It may take a few moments for the door lock to disengage. The door will not open until 3 minutes after the washer has stopped or the power has been off. Ensure all water in the drum is drained and that the door lock light is off.
Why Samsung WW8 T Washer water supply is insufficient, or no water is supplied?
If your Samsung washer isn't getting enough water, fully open the water tap and ensure the door is properly closed. Check that the water supply hose isn't frozen, kinked, or clogged, and that there is sufficient water pressure. Make sure the cold and hot water taps are properly connected. You may also need to clean the mesh filter, as it could be clogged.
Why Samsung WW8 T Washer stops?
If your Samsung washer stops mid-cycle, ensure the power cord is plugged into a live electrical outlet and check the fuse or reset the circuit breaker. Close the door and tap and hold the start button. There may be a pause or soak period in the cycle, so wait briefly. Make sure the mesh filter of the water supply hose is not clogged. Insufficient power can also cause the washer to stop temporarily.
Why Samsung Washer excessive suds?
Excessive suds in your Samsung washer can be due to using the wrong type of detergent. Use the recommended types of detergent as appropriate, and opt for high efficiency (HE) detergent to prevent oversudsing. Reduce the detergent amount for soft water, small loads, or lightly soiled loads. Non-HE detergent is not recommended.
General| Capacity | 8 kg |
|---|---|
| Spin Speed | 1400 RPM |
| Energy Efficiency Class | A |
| Noise Level (Spin) | 72 dB |
| AddWash | Yes |
| Hygiene Steam | Yes |
| Drum Clean | Yes |
| Digital Inverter Technology | Yes |
| Noise Level (Wash) | 53 dB |
| Digital Inverter Motor | Yes |
| Eco Bubble Technology | Yes |
| AddWash Door | Yes |
| Color | White |
| Dimensions (H x W x D) | 850 x 600 x 550 mm |
Key precautions to reduce risks of fire, electric shock, and injury.
Critical warnings regarding safe installation procedures and potential hazards.
Critical warnings about potentially hazardous situations during appliance operation.
Critical warnings related to cleaning the appliance safely and avoiding damage.
Key considerations for electrical supply, grounding, and placement.
Detailed guide to properly install the washing machine from setup to power connection.
Guide for the first-time setup process, including language and calibration.
Explains the function of each button and display element on the control panel.
A troubleshooting guide for common problems and their solutions.
Explains error codes displayed on the machine and how to resolve them.
To Next Page
