Samsung X22 - Using the Battery Calibration Function

140
Using the Battery Calibration Function
Whencharging/dischargingthebatteryrepeatedlyfora
shorttimeonly,thebatteryusagetimemaybereducedby
thedifferencebetweentheactualbatterychargeandthe
remainingchargedisplay.
Inthiscase,theactualbatterychargeandtheremaining
chargedisplaywillbethesamebydischargingthebattery
completelyusingtheBatteryCalibrationfunction,and
thenrechargingitagain.
1
 DisconnecttheACpoweradapterafterturningoff
thecomputer.
2
 RestartyourcomputerandpresstheF2buttonwhen
theSamsunglogoappears,tostarttheBIOSSetup.
3
 MovetotheBoot > Smart Battery Calibration item
usingthedirectionkeysandpress<Enter>.
4
 HighlightYes in the Battery Calibration
Conrmation window and press <Enter>.
TheBatteryCalibrationfunctionisactivatedand
thebatteryisforcefullydischarged.Tostopthe
operation,pressthe(Esc)button.
Thisoperationrequires3~5hoursdependingonthe
batterycapacityandtheremainingbatterycharge.