Samwon Tech TEMI1500 - Page 21

19
03. Operation state screen setting
(6) Termination screen for operation of stationary time setting
●Thestationaryoperationisterminatedwhileitshowsthemessage,“Thetimesettingoperationisterminated.”
whentheoperationisterminatedbytheelapseofsettingtimein[4.Operationmotionsetting]
●Themessageisnotappearedonthescreenwhenitisforciblyterminatedbypressing“Stop”buttonduringoperation.
●Themessageisdisappearedbytouchingthecorrespondingpartwhentheoperationterminationmessageisdisplayincaseofoperationtermination.
(Itissamewiththeprogramoperationtermination.)
[Fig. 3-12 ]Terminationscreenforoperationofstationarytimesetting