Samwon Tech TEMI1500 - Page 28

26
(6) Termination screen for operation of program
●Theprogramoperationisterminatedwhileitshowsthemessage,“Theprogramoperationisterminated.”
whentheoperationforsegmentsettingrangesavedintothepatternisterminated.
●Themessageisnotappearedonthescreenwhenitisforciblyterminatedbypressing“Stop”buttonduringoperation.
●Themessageisdisappearedbytouchingthecorrespondingpartwhentheoperationterminationmessageisdisplayincaseofoperationtermination.
(Itissamewiththestationaryoperationtermination.)
[Fig.3-23]Terminationscreenforoperationofprogram