How to deal with condensate water problem in S&A Chiller?
If you are experiencing a significant amount of condensate water with your S&A Chiller, it could be due to the water temperature being much lower than the ambient temperature combined with high humidity. Try increasing the water temperature or insulating the pipeline to preserve heat.
Why does water drain slowly from my S&A CWFL-500 when changing water?
If water drains slowly from the outfall of your S&A Chiller during water changes, the injection port might not be open. Ensure that the injection port is open.
Guidelines for professional handling, specification adherence, and avoiding hazardous environments.
Warnings on electrical connections, covers, water exposure, high voltage, and hot surfaces.
Safety measures for transport, installation, environmental conditions, and liquid transport.
Hazards during operation, handling internal parts, and refrigerant leakage.
Precautions for pre-operation checks, cleaning, and handling specific components.
Overview of the industrial chiller and its application in laser processing.
Explanation of the chiller's refrigeration cycle and water circulation.
Identifies key parts of the chiller model through a diagram.
Visual representation and labeling of the chiller's external parts.
Steps for opening the package and verifying the machine's condition and accessories.
Specifications for stable voltage, horizontal mounting, suitable environments, and cooling media.
Instructions for pipeline connection, water filling, and air exhaustion.
Guidance on selecting cables, grounding, and power supply stability.
Methods for removing air from the water pump and pipe.
Confirming pipeline connections, valves, water level, and electrical grounding.
Introduction to the temperature controller panel and its indicators.
Using controller keys to display temperature, flow sensor values, and modify parameters.
Procedure to reset controller parameters to default factory settings.
Understanding alarm codes and how to suspend audible alarms.
Adjusting parameters like temperature difference and set water temperature.
Accessing and modifying advanced settings via password.
Parameter settings for intelligent mode, controlling temperature based on room temperature.
Parameter settings for constant temperature mode, maintaining a fixed water temperature.
Wiring diagrams for alarm output terminals connected to aviation plugs or electrical boxes.
Table detailing alarm conditions, codes, buzzer status, and output terminal states.
Instructions for cleaning filter gauze and condenser dust using compressed air.
Guidelines for cleaning or replacing the filter element to maintain water flow and quality.
Troubleshooting for machine not turning on or fuse burnout.
Resolving flow alarms and ultrahigh water/room temperature alarms.
Addressing issues like poor ventilation, excessive heat load, and slow drainage.
Detailed electrical wiring diagram for CWFL-500/1000 models.
Detailed electrical wiring diagram for CWFL-1500/2000 models.
Detailed electrical wiring diagram for CWFL-3000 model.
To Next Page
General
