S&C Alduti-Rupter Instruction Sheet

S&C Instruction Sheet 761-545 3
Introduction
Figure 1. Switch nameplates with ratings.
Nameplate on switch base Nameplate on operating handle
S&C
ALDUTI-RUPTER
®
SWITCH
Outdoor Distribution
S&C
ALDUTI-RUPTER
®
SWITCH
Outdoor Distribution
AMPERES, INTERRUPTING -
WHEN SWITCHING:
PARALLEL
CIRCUITS
LOAD
▲
RESTR. TO
APPL. CLASSES ◆
C AT.
NO.
KV, NOMINAL -
MAX DES, - BIL
AMPERES
CONTINUOUS
AMPERES, RMS
ASYM. MOMENTARY
CABLE OR
CAPACITORS
◆
CATALOG
NUMBER
KILOVOLTS
AMPERES
▲ And associated magnetizing currents.
◆ See S&C Descriptive Bulletin 761-31.
TORONTO, ONTARIO M9W 1G4
MADE IN CANADAGTB-324R21
MADE IN CANADAGTB-2907R11
S&C ELECTRIC CANADA LTD.
TORONTO, ONTARIO M9W 1G4
S&C ELECTRIC CANADA LTD.
Proper
Application
WARNING
The equipment in this publication is only intended for a specific application. The application must
be within the ratings furnished for the equipment. Ratings and other application information can
be found in Specification Bulletin 761-31.
In most applications, Alduti-Rupter Switches are capable of switching rated continuous load currents
at full voltage. The ratings for the particular switch are listed on nameplates attached to the operating
handle and the switch. See Figure 1.

S&C Alduti-Rupter Specifications

General

Brand	S&C
Model	Alduti-Rupter
Category	Switch
Language	English