3 656-500
SAFETY INFORMATION
Understanding Safety-Alert
Messages
There are several types of safety-alert messages which may appear
throughout this instruction sheet as well as on labels attached to the
PureWave AVC. Familiarize yourself with these types of messages
and the importance of the various signal words, as explained below.
Following Safety Instructions If you do not understand any portion of this instruction sheet and
need assistance, contact your nearest S&C Sales Office or S&C Autho-
rized Distributor. Their telephone numbers are listed on S&C’s web-
site www.sandc.com. Or call S&C Headquarters at (773) 338-1000; in
Canada, call S&C Electric Canada Ltd. at (416) 249-9171.
Replacement Instructions and
Labels
If you need additional copies of this instruction sheet, contact your
nearest S&C Sales Office, S&C Authorized Distributor, S&C Head-
quarters, or S&C Electric Canada Ltd.
It is important that any missing, damaged, or faded labels on the
equipment be replaced immediately. Replacement labels are available
by contacting your nearest S&C Sales Office, S&C Authorized Distrib-
utor, S&C Headquarters, or S&C Electric Canada Ltd.
Ç
DANGER
“DANGER” identifies the most serious and immediate hazards
which will likely result in serious personal injury or death if
instructions, including recommended precautions, are not
followed.
Ç
WARNING
“WARNING” identifies hazards or unsafe practices which can result
in serious personal injury or death if instructions, including recom-
mended precautions, are not followed.
Ç
CAUTION
“CAUTION” identifies hazards or unsafe practices which can result
in minor personal injury or product or property damage if instruc-
tions, including recommended precautions, are not followed.
NOTICE
“NOTICE” identifies important procedures or requirements that
can result in product or property damage if instructions are not fol-
lowed.
NOTICE
Thoroughly and carefully read this in-
struction sheet before installing your
S&C PureWave AVC.
To Next Page
Loading...
Need help?
General
