Conventions Used in This Manual
The name of a button is always placed within square brackets when
the button is described in text. For example, “...push [SYNC] to
align the heading bug...”
In some cases, the text will describe a two-button sequence, for
example, “...push [SHFT]>[SYNC] to center the needle...”. This
means that the buttons are to be pushed consecutively, not held
simultaneously.
This manual will use terms which should be familiar to aviation-
minded readers, such as “selected radial” and “magnetic heading.”
Terms which are specific to the SN3308 will be placed in italics, for
example, “
lower display area
.”
1-3
1
Welcome to the SN3308
CHAPTER
To Next Page
Loading...
