Quick Map Off
During normal operation press and hold the [MAP] key. After 1.5
seconds the map display will jump to MAP OFF from any memory.
You can use this feature to quickly remove all map data from the
screen at any time. Note that this feature will also turn off the WX-
500 Stormscope display, if enabled.
Map Auto-Range
The SN3308 provides a one-touch automatic ranging function.
Pressing and holding the [ ] key for 1.5 seconds will cause the
SN3308 to zoom to the lowest map range at which the current
waypoint is still visible. Conversely, pressing and holding the [ ] key
will zoom to the highest setting needed to display the full flight plan.
5-12
5
Enhanced Moving Map Features
CHAPTER
To Next Page
Loading...
