Using the Music Controls
Your player has two modes of operation: Play Music and Recorder. To play
your music files, you need to be in Play Music mode. Follow these steps:
3. Press the Power/Menu Button once. The SanDisk logo and Sansa logo
will briefly appear onscreen then disappear. (Can’t find the Power/Menu
Button on your player? See The Basic Controls section on page 5.)
WARNING: If the onscreen message says „Locked“ and then shuts off,
locate the Hold Button on the left side of your player. Slide that button
left to unlock your device. Then repeat Step 1 above. See The Basic
Controls section on page 5 if you cannot find the Hold Button.
4. If you do not see music files onscreen, briefly press the Power/Menu
Button on the right side of your player. The software Menu will appear.
Press the Repeat/AB/Down Button or the Play/Pause/Up Button to scroll
through the Menu. Highlight Play Music mode and press the Select But-
ton to enter.
When you are in Play Music mode, the screen shown in Figure 3 will appear
on your player.
Figure 3: The Music LCD screen
The control buttons and ports for your player are described in The Basic
Controls section on Page 5 More detailed descriptions on how the controls
work is included in the step-by-step instructions throughout this document. In
addition, the Navigating the Software Menus chapter on Page 25 descri-
bes the onscreen menus that appear when you use these controls.
12 Playing Music
To Next Page
Loading...
Need help?
General
