Adjusting Settings
Your player allows you to define the equalizer and repeat settings for music.
Set Equalizer Playback
The sound settings on your Sansa player can be optimized for different mu-
sic styles using the onboard five-band equalizer. Follow these steps:
1. Put your player in Play Music mode. See Using the Music Controls on
Page 12 if you need help with this step.
2. Briefly press the Power/Menu Button. The software Menu will appear
onscreen. See The Basic Controls section on Page 5 if you cannot find
the Power/Menu Button.
3. Press the Repeat/AB/Down Button to scroll to Settings. Press the Select
Button to enter Settings mode.
4. Press the Repeat/AB/Down Button to scroll to the Equalizer item.
5. Press the Select Button to select the Equalizer. Your unit is preset to
Custom. Press Select to manually change the equalizer setting, or save
time by pressing the Repeat/AB/Down Button for preset equalizer levels.
Press the Play/Pause/Up Button to scroll through the Pop, Classical,
Jazz and Rock equalizer settings. If you are playing a song when you
change settings, your music will change to the equalizer setting that is
highlighted. Press the Select Button to select the equalizer setting you
want.
6. The custom equalizer configuration screen will appear as a set of five
vertical rectangles that represent five equalizer bands you can define.
Press the Next/Fast Forward Button to move from rectangle to rectan-
gle, from left to right. Press the Play/Pause/Up Button or Repeat/AB/
Down Button to increase or decrease the setting for each equalizer
band.
7. When you have set the equalizer bands, press the Select Button twice
to save and exit back into the menu.
8. All music played will use these settings until you change to another
equalizer setting.
16 Playing Music
To Next Page
Loading...
Need help?
General
