Need help?Do you have a question about the S&P CADB/T-HE PRO-REG Series and is the answer not in the manual?
General| Frequency | 50/60 Hz |
|---|---|
| Accuracy | ±1°C |
| Category | Heating |
| Series | CADB/T-HE PRO-REG |
| Type | Electric Heater |
| Application | Commercial and Industrial |
| Safety features | Overheat Protection |
| Voltage | 230V, 400V |
| Temperature Range | 5°C - 40°C |
| Dimensions | Varies depending on model |
| Weight | Varies by model |
Covers product introduction, safety regulations, general instructions, and unit labelling.
Guidelines for safely handling the heat recovery units.
Covers model-specific installation, outdoor use, dimensions, and maintenance space.
Details technical specifications, mounting filters, and various connections.
Standard configuration options for PRO-REG units.
Details control panel elements, functions, security, and communication.
Explains CAV, VAV, COP modes, temperature control, and setpoint adaptation.
Programming operating times, boost, remote start/stop, and free cooling.
Covers water heater frost, heat exchanger protection, and fire function.
Details external batteries, assembly, and wiring for accessories.
Reconfiguring controller, resetting it, and system integration.
Connecting to GTC systems, including BACnet TCP/IP.
Filter replacement, installation, heat exchanger cleaning, and drainpipe.
Common anomalies, failure list, and troubleshooting steps.
Detailed wiring diagrams for the main unit and rewiring for accessories.
To Next Page
