S&P CADB/T-HE PRO-REG Series User Manual

32
ENGLISH
9.4. POSTHEATER CONTROL
It is possible selecting between 4 different types of postheating control.
To select it follow the following sequence:
Ventilation mode
9.4.1. Constant supply air temperature maintenance
Constant supply air
T°C
Heating mode
Temperature controller works comparing supply air tempe-
rature with set point defi ned by console.
9.4.2. Constant ambient temperature maintenance
Room T°C control
Heating mode
Supply air temperature is controlled in cascade way with
ambient temperature. Supply air temperature is defi ned
depending on difference between ambient temperature and
set point. In front of request, the controller tries to keep
ambient temperature limiting duct temperature, which is
maintained around 12 and 30ºC, at same time.

S&P CADB/T-HE PRO-REG Series Specifications

General

Brand	S&P
Model	CADB/T-HE PRO-REG Series
Category	Heating System
Language	English