S&P CADB/T-HE PRO-REG Series User Manual

44
ENGLISH
Fix the module to the heat recovery unit permanently.The access to fi xing points is performed by the
side of the unit, removing one of the side panes (from the CADB or from the module maintenance
panel).
To carry it out, use the 4 screwed knobs delivered with the module.
5. Finally place the fl ange panel (that was disassembled at the fi rst step) over the module outlet using
the 4 screws that fi xed the panel to the CADB-HE.

S&P CADB/T-HE PRO-REG Series Specifications

General

Brand	S&P
Model	CADB/T-HE PRO-REG Series
Category	Heating System
Language	English