SANLI LBP46 - Specifications

User’s Manual Sanli LS42 - LSP42 - LSP46-LBP46 / 19
Note: There should be about 2 cm of free-play before the advance lever
engages drive. The mower should begin to move forwards gradually from
that point onwards.
3.34 Maintenance schedule
Summary of regular maintenance required by the mower
Frequency
Components
Before each
mowing
After 5 hours
Every 25 hours or once a year
minimum before winter lay-up
Cutting system
Check and verify
its condition
Sharpen and balance blade.
Replace worn or damaged blade.
Spark plug
Check
Clean and check the clearance of
the electrodes. Replace if
necessary.
Air Filter
Check
Clean the filter. Replace if
necessary.
Oil
Check the level
Drain and
renew
Drain and renew
4. Specifications
Consistent with our policy of continuous improvement, SANLI reserves the
right to change the design and configuration of any of its products without
notice or obligation. Therefore, please treat the text and images in this
manual as being for illustrative purposes only. They may in no case serve as a
basis for any legal claim.