To Next PageTo Next Page
Need help?Do you have a question about the Santon PP170E and is the answer not in the manual?
General| Brand | Santon |
|---|---|
| Model | PP170E |
| Category | Water Heater |
| Language | English |
Overview of the Santon Premier Plus unvented water heater and its compliance with regulations.
Lists all parts included in the Premier Plus unvented water heater package.
Specifies correct positioning and environmental considerations for unit installation.
Details requirements and recommendations for the mains water supply to the unit.
Discusses suitable terminal fittings and pressure considerations for outlets.
Lists incompatible systems and situations where the heater should not be used.
Specifies the types of pipe fittings to be used for connections to the unit.
Details requirements for the cold water supply connection, including pipe size.
Explains the function and installation of the combined pressure reducer, strainer, and valves.
Describes the installation of a drain tap for maintenance and servicing.
Details the purpose, pre-charge, and installation of the expansion vessel.
Discusses requirements and considerations for installing a secondary circulation system.
Describes the hot water outlet connection and distribution pipework recommendations.
Covers requirements for safely conveying discharge from safety devices, following G3.
Lists critical warnings regarding the installation and operation of the system.
Outlines the required pipework connections for direct units.
Explains the electrical supply requirements and wiring for direct units.
Provides crucial safety information and warnings for direct unit installation.
Outlines the required pipework connections for indirect units.
Explains the electrical supply requirements and wiring for indirect units.
Guides the selection of a compatible boiler for indirect systems.
Covers the control of the primary circuit, including the motorised valve.
Discusses the integration of space heating controls with the unit.
Explains the correct procedure for filling the unit with water and flushing.
Describes essential checks to ensure system integrity and proper function.
Outlines the commissioning steps for direct electric units.
Outlines the commissioning steps for indirect units, including primary circuit.
Emphasizes the importance of completing the Benchmark log book for installation and service.
States the necessity of regular maintenance for safety and performance.
Describes how to test the safety valves for proper operation.
Details the procedure for cleaning the strainer element.
Explains how to remove and clean immersion heaters, including safety precautions.
Details how to check and recharge the expansion vessel pressure.
Outlines the steps for recommissioning after maintenance.
Reinforces the need to update the Benchmark log book after maintenance.
Stresses that only authorized personnel should perform servicing and use genuine parts.
Lists available spare parts with their part numbers for ordering.
Details a chart to help identify faults, their causes, and recommended remedies.
Crucial safety warnings for users, especially regarding relief valve discharge.
Explains how users can adjust the temperature settings on direct units.
Explains how users can adjust temperature settings on indirect units.
Describes normal flow behaviour and potential water cloudiness.
Refers users to fault-finding and explains intermittent discharge.
Outlines the terms and conditions of the product guarantee.
Provides information on the product's environmental impact and recyclability.
Lists companies where spare parts can be purchased.
