To Next PageTo Next Page
Need help?Do you have a question about the Santon PREMIER PLUS and is the answer not in the manual?
General| Rated Voltage | 230 V |
|---|---|
| Energy Efficiency Class | C |
| Frequency | 50 Hz |
| Protection | IPX4 |
| Capacity | 150 liters |
| Type | Electric water heater |
| Mounting | Vertical |
| Safety Features | Safety valve, thermal cut-out |
Lists all components provided with the Premier Plus solar water heater unit.
Guidelines for correctly positioning and installing the Premier Plus solar water heater.
Advice on selecting and connecting terminal fittings for hot water outlets.
Lists situations and systems where the Premier Plus unvented solar water heater should not be used.
Details on pipe connections, including compression fittings and BSP threads for the unit.
Recommendations for the cold water supply, including pipe size and stopcock installation.
Information on the cold water combination valve, its function, and installation position.
Guidance on installing a drain tap for system maintenance and draining.
Instructions for connecting and positioning the expansion vessel for water expansion.
Details on setting up secondary circulation for hot water, including pipe sizes and pumps.
Information regarding the hot water outlet connection and distribution pipework.
Details on discharge pipe D1, tundish installation, and discharge pipe D2 requirements.
How to connect the solar coil to the pumped solar primary circuit using compression fittings.
Guidance on using a solar controller for temperature control and probe insertion.
Outlines the necessary pipework connections for direct unit installations.
Details on wiring immersion heaters, earthing, and protective devices for direct units.
Crucial safety warnings, including disconnecting power and not bypassing thermal cut-outs.
Details pipework connections for indirect units, including primary circuit connections.
Instructions for electrical supply, wiring, and safety for indirect units.
Advice on selecting compatible boilers and feed/expansion cisterns for indirect systems.
Information on controlling the auxiliary circuit using a motorised valve and pump.
Step-by-step guide to filling the unit with water and purging air.
Procedures for checking connections, strainers, and safety valves after filling.
Instructions for filling and controlling the solar primary circuit with the solar controller.
Commissioning steps for direct units, including temperature setting and checks.
Commissioning the indirect secondary circuit, including valve operation and temperature adjustment.
Instructions for completing the Benchmark Log Book and explaining the system to the customer.
Overview of essential maintenance for unvented hot water systems.
Procedure for manually operating and checking safety valves.
Steps for accessing, cleaning, and reassembling the system strainer.
Instructions for draining, removing, cleaning, and refitting immersion heaters.
How to check and re-charge the expansion vessel pressure.
Steps for re-commissioning the unit after maintenance.
Critical warnings for users regarding safety valves and system faults.
How solar differential temperature controllers manage solar coil heating.
User guide for adjusting immersion heater thermostats and thermal cut-outs.
User guide for adjusting indirect unit thermostats and motorised valves.
Explains normal flow behaviour and water cloudiness in unvented systems.
Information on potential operational faults and expansion vessel air volume.
Guidance on identifying and ordering correct replacement parts for the PremierPlus cylinder.
Introduction to the fault finding chart for diagnosing and rectifying system operational issues.
Outlines the warranty period and conditions for the Santon PremierPlus, including parts and labour coverage.
Information on product materials and responsible disposal at the end of their useful life.
