SANTOS: Operating and servicing manual
98 118 EN 3.5 - 07 2013 11 / 21 www.santos.fr
SAFETY SYSTEMS / MAINTENANCE
MOTOR OVERLOAD SAFETY SYSTEM
The On/Off switch (13) switches automatically to « 0 ».
REMARKS: Mixing dough requires heavy work from the motor. It is thus normal for the
motor to heat up. It has been designed for the purpose. It is however protected by a
thermal circuit-breaker built into the On/Off switch (13). Should there be an overload or
jamming, for example, this circuit-breaker will trip.
In this case, remove the cause of the trouble and allow the motor to cool, wait for a few
moments for automatic resetting of the circuit breaker then operate the On/Off switch
to start the motor.
If the problem persists, switch off the machine (unplug the power cord from the mains (10))
and call a technician of the maintenance department or contact an approved SANTOS
retailer.
TOOL ACCESS SAFETY SYSTEM
The machine can start only if the protective cover (1) is lowered.
• the opening of the cover (1) stops the machine and all its moving parts.
• Interruption of the power supply stops the machine.
Restarting of the machine requires a fresh action on the switch (13).
For safety reasons, it is prohibited to insert a finger or part of one's hand into the opening
for adding ingredients (Fig. F).
To Next Page
Loading...
