SANTOS: Operating and servicing manual
98 118 EN 3.5 - 07 2013 14 / 21 www.santos.fr
• Check the correct position of the protective cover (1).
• If the bowl is overloaded (too much flour in the bowl), during rotation of the fork,
too much stiff dough could gather around the fork and slightly raise the protective
cover (1) thus stopping the machine.
• Clear the fork or lower the cover to start the motor.
Flour falls out of the bowl
If the bowl is too heavily loaded, before the flour is completely wet, a small quantity can be
ejected from the bowl.
• Reduce the load (quantity of flour in the bowl).
To Next Page
Loading...
