SANTOS: Operating and servicing manual
98 118 EN 3.5 - 07 2013 12 / 21 www.santos.fr
MAINTENANCE
Before carrying out any work on the machine, it must be unplugged from the mains and
the motor start capacitor discharged.
Discharging the capacitor:
Using a screwdriver with an insulated handle, touch the 2 capacitor
connections (9). You should see an electric arc which means that the
capacitor has been discharged.
Spare parts:
IMPORTANT: Use of spare parts other than certified original SANTOS
parts is prohibited
This machine requires no specific maintenance. The bearings are lubricated for life.
If work is required to replace worn parts such as the grindstones or the electric or other
components, refer to the parts list (see exploded view at the end of the manual).
For all spare part orders (see references in the exploded view at the end of the
manual), state:
the type,
the machine serial number and
the electrical specifications (16)
recorded under the machine.
To Next Page
Loading...
