To Next PageTo Next Page
Need help?Do you have a question about the Sanyo Denki SANMOTION R2AA08075FXH00M and is the answer not in the manual?
General| Model | SANMOTION R2AA08075FXH00M |
|---|---|
| Category | Servo Drives |
| Manufacturer | Sanyo Denki |
| Rated Output Power | 750 W |
| Input Voltage | 200-230 VAC |
| Input Frequency | 50/60 Hz |
| Control Method | PWM Control |
| Feedback System | Incremental Encoder |
| Communication Interface | RS-485 |
| Protection Functions | Overvoltage, Overheat |
| Operating Temperature | 0 to 55°C |
| Storage Temperature | -20 to 85°C |
| Vibration Resistance | 4.9 m/s² |
| Humidity | 20 to 85% RH (Non-condensing) |
Improves system response with inertia identification and auto-tuning modes.
Notch filter reduces phase delay for improved velocity response.
New algorithm drastically shortens positioning settling time for equipment.
Doubled positioning performance via new control algorithms.
Lists standard model numbers for 200V system servo motors.
Lists standard model numbers for 100V system servo motors.
Wiring and component diagram for single-axis servo amplifiers.
Wiring and component diagram for multi-axis servo amplifiers.
Detailed technical data for servo motors and encoder wiring.
Detailed technical data for servo motors, including torque, speed, and current.
Wiring diagram for multi-axis servo amplifier encoders.
Detailed wiring diagrams for single-axis servo amplifiers.
Screen for configuring general and motor parameters via PC.
Screens for monitoring amplifier status, signals, and alarms.
Functions for testing motor operation, speed, and filters.
