Sanyo Denki PY0A015 User Manual

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | sales@artisantg.com | www.artisantg.com
SM
View
Instra

Sanyo Denki PY0A015 Specifications

General

Brand	Sanyo Denki
Model	PY0A015
Category	Servo Drives
Language	English

Summary

Safety Precautions for PY Servo Systems

General Safety Precautions

Highlights critical safety warnings and cautions for equipment operation and installation.

Installation Guide for PY Servo Systems

Unpacking and Inspection Procedure

Amplifier Installation Guide

Comprehensive instructions for installing the servo amplifier, including environmental and mounting requirements.

Motor Installation Guide

Guidelines for installing the servo motor, covering environmental and mounting considerations.

Wiring the PY Servo System

Wiring Precautions and Guidelines

Essential precautions and best practices for safe and effective wiring.

System Connection Diagrams

External Regeneration Resistor Connection

Operation of PY Servo Systems

Amplifier Power-On Sequence

Stop Sequences

Procedures for stopping the motor due to bus power loss or internal errors.

Servo OFF Sequence

Steps and timing for disabling the servo amplifier and motor excitation.

Alarm Reset Sequence

Over-travel Sequence

Drive Setup and Configuration

Using the Remote Operator

Guide to operating and configuring the amplifier using the remote operator.

PY Setup Software Configuration

Instructions for using the PY Setup Software for amplifier configuration and testing.

Jogging and Amplifier Tuning

Amplifier Parameters Reference

Amplifier Parameter Reference

Control Loop Parameters

Detailed Parameter Descriptions

Maintenance and Troubleshooting

Maintenance Procedures

Troubleshooting Guide

Guidance for diagnosing and resolving issues based on alarm codes and operating conditions.

Alarm Diagnoses and Corrective Actions

Detailed explanations of specific alarm codes, their causes, and corrective actions.

Specifications for PY Servo Systems